| T O P I C R E V I E W |
| Hassan Kude |
Posted - Mar 12 2003 : 08:06:09 AM
can i get a rocket design then from this forum?,
Zig Zag |
| 7 L A T E S T R E P L I E S (Newest First) |
| cirvin |
Posted - Aug 10 2003 : 10:44:43 PM
the oil heats it evenly.
next stop: nobel prize winner! |
| BEatonNo1 |
Posted - Aug 09 2003 : 3:15:01 PM
boiling oil!? I just use a propane heater when i need to reshape pvc
|
| cirvin |
Posted - Aug 09 2003 : 12:38:48 PM
you could dip the end of pvc pipe in boiling oil and tehn flaring the tail on a funnel
next stop: nobel prize winner! |
| n/a |
Posted - Aug 08 2003 : 7:49:59 PM
making your own propellant is hard I have mad rockets with the Estes rocket engines they work grate just go to a hobby store they will have them as for the Rocket body they are even harder I mad mine out if PVC and cut the slots for the tail fins with a saw just try to get the cuts right in the middle and if you are going to have it go up and explode like I did :) test it a few times b4 you put a big explosives
Edited by - semper fi on Aug 08 2003 7:51:35 PM |
| cirvin |
Posted - Jul 15 2003 : 12:36:29 AM
Buy some bottle rockets, duck tape them together and put gasloine on the fuses. the blast from the chamber will ignite the fuses.
|
| Hassan Kude |
Posted - Mar 13 2003 : 05:20:24 AM
ben_seg,
i'm quite good in chemistry.but you know i'll need the design of the rocket's body especially the aerodynamics that would be of best advantage to guarantee:speed and distance, as well as some reasonable accuracy.
whats more,i don't wan't to blow my hands off.i.e,the proportion's of the propellants must be right,the quantity must also be right to ensure safety.this is all i require to know.
Zig Zag |
| n/a |
Posted - Mar 12 2003 : 09:02:09 AM
If you are good in chemistry, You will be able to do it by yourself by making a big firework.
|
