Aaron's Homepage Forum

Aaron's Homepage Forum

All Forums

Vehicles

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Insert an Image File (GIF, JPG, JPEG, BMP, ZIP, PNG)
Check here to include your profile signature.

T O P I C R E V I E W
gokartmaniac	Posted - Nov 29 2003 : 09:14:28 AM dear people of the forum i am planing on making an electric powered bike i have two twelve volt motors which are each around 2 inches high i was wondering if they would be powerfull enough there from a power wheels electricc toy theres also two 6 volt 112 amp hour batteries i plan on using a couple of other batteries i havfe around the house would these motors be big enough if anyones ever done this before pleaase post some info also i w nt to make it my own version of the bidwell bike pusher tell me what you think thank you Seth A. Meredith
1 L A T E S T R E P L I E S (Newest First)
Aaron Cake	Posted - Dec 01 2003 : 09:53:13 AM Without more info on the motors, I can't say much. But two inches sounds quite small. What RPM? Are they gear motors? What current do they draw under stall and load? Perhaps the best advice that I can give is to take a look at this page: http://www.austinev.org/evalbum/index8.html Scroll down to the middle where you will find the bicycles, and look at what others have done. Oh, and I doubt that you have 112 AH batteries. Those would be HUGE (think computer monitor size). You probably have 11.2 AH batteries.

Aaron's Homepage Forum

This page was generated in 0.05 seconds.