Aaron's Homepage Forum
Aaron's Homepage Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Electronics
 Telephone
 Question about pulse dialing from a non-expert		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Paolo
New Member

1 Posts
Posted - Sep 30 2005 :  11:39:34 AM  Show Profile  Reply with Quote
Hello everyone. I have a problem and I hope someone can give some suggestions.

I have an old wallmount phone, with rotary dialing. My phone company (SBC) confirmed the line is supposed to also work with pulse dialing.

Unfortunately, when I dial using my rotary phone, it seems the line doesn't "hear" the pulses, and just doesn't do anything. For some reasons, if I dial just the number 1 (with the rotary) the line goes silent, probably waiting for the other pulses.

So, my question is: do you think there may be a problem with the timing of the pulses, or you may have some other suggestions to resolve my issue ?

Thanks so much
Paolo

audioguru
Nobel Prize Winner

Canada
4218 Posts
Posted - Oct 01 2005 :  10:33:24 AM  Show Profile  Reply with Quote
If the line goes silent when you dial a "1", then it does hear the pulse and is waiting for more. Give it more pulses by dialing a whole phone number.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Aaron's Homepage Forum © 1995-2020 AARONCAKE.NET Go To Top Of Page
This page was generated in 0.05 seconds. Snitz Forums 2000