| T O P I C R E V I E W |
| n/a |
Posted - Jan 31 2004 : 2:54:55 PM
Hi,
What type of tape recorder is required for the telephone recorder circuit located here http://www.aaroncake.net/circuits/phonrec.htm, because the average voltage of a phone line is about 40V DC and the normal audio voltage of a audio system is between 1 and 1.3V (see http://www.aaroncake.net/circuits/vumeter.htm note #2).
Thank you
Edited by - jsgagne on Feb 03 2004 5:00:43 PM |
| 10 L A T E S T R E P L I E S (Newest First) |
| Aaron Cake |
Posted - Aug 27 2004 : 08:52:31 AM
The remote jack is the jack on the tape recorder that allows you to externally switch it on and off for recording. Not every recorder has this, but most older dedicated recorders do.
|
| n/a |
Posted - Aug 27 2004 : 03:18:52 AM
Thanks sir for the fast reply and great info but I still have one question. What is the remote control jack? I will connect the two wires to the phone line and the other one to the recorder so, what is the last one? I mean that I got the parts from the shop and i will try to do it by my self (God helps me) (excuse me, I am mechanical engineer and this is the first time to make a electric circuit) but I still do not know where to plug the remote control jack to. Is this the tap adaptor circuit? I see many of then in the net about 35 $. Thanks very much for assistance. You are such a great help. Waiting for your reply.
|
| Aaron Cake |
Posted - Aug 26 2004 : 09:07:39 AM
This circuit will do exactly what you want. http://www.aaroncake.net/circuits/phonrec.htm I think. Or "phonerec.htm" if the one without the "e" doesn't work.
There are also software packages (CallSoft) that do what you want.
|
| n/a |
Posted - Aug 25 2004 : 1:49:40 PM
Hello all:
How are you? I have just one problem and I trust you to help me solving it. I want to record all the phone calls (outgoing and incoming) automatically when I am not home.
Is there any way to do this without anyone could know or feel that there is strange equipment installed? I preferred software and use the computer but I guess making such a simple circuit like this is great idea. I am mechanical engineer but I will teach my self doing it thanks to your tip. Forgive me for asking too much as I am not prof in this matter.
Thanks in advance. Have a wonderful day.
Regards. |
| cirvin |
Posted - Aug 25 2004 : 11:01:40 AM
use a computer instead of the tape recorder? Absolutely. Just hook the device into the line in on your card.
Ony trick would be getting the computer to recignise when it needs to begin reording.
http://daxter12.topcities.com <Its updated now! |
| n/a |
Posted - Aug 24 2004 : 10:13:58 AM
Is there any possiple to connect the Line recorder to soundcard on PC?
and to record automaticly?
|
| n/a |
Posted - Feb 01 2004 : 5:30:14 PM
Thank you.
|
| YS |
Posted - Feb 01 2004 : 1:06:17 PM
remote control is usually a button on the mic. Some tape recorders have this function and a special jack close to mic jack. Usually small recorders, intended for speech recording.
|
| n/a |
Posted - Feb 01 2004 : 11:34:28 AM
Thank you,
Another question now, where do I connect the "remote control" thing ? I looked on my tape recorder and I didn't see anything about "control".
Please help me !!!
|
| YS |
Posted - Jan 31 2004 : 10:23:29 PM
DC voltage of the phone line is blocked by capacitor. AC voltage in phone line is between mic and line level. So, regular tape recorder should be fine.
|
