| T O P I C R E V I E W |
| George |
Posted - Dec 20 2004 : 2:04:07 PM
Hi there, first of all thats a very cool site.-
I tried to buid up the FM Telephone Bug. I have some problems. I don't know what's the 22 AWG wire wound on a 9/64 drill bit. Can you give me an image please? Also my telephone line has 1 red, 1 green and 2 other wires. Do the IN1,2 & OUT1,2 have to be connected to these red and green wires? (I don't understand this part "The green wire from OUT1 goes to the phone") Also sorry for my English, I'm Greek. Many thanx! |
| 1 L A T E S T R E P L I E S (Newest First) |
| sorry123 |
Posted - Dec 20 2004 : 9:52:04 PM
I dont know much about electronic's, however I built a electronic phone bug, that was outputed to a AM frequency controled by a variable capaciter, I think. The way I did it was by going to Radio Shack, which I'm guessing you have in greek, or wherever you live. They have a AM (Or FM, I think) transmitter. It is very, very small, about the size of your thumb. It work's perifcly for a room bug/telephone bug/ETC. It was fairly cheap, around 10.00 $ American dollar's. It comes with the board, resitor's, capaciter's, transister's, ETC. All you do is read the shematic. Good Luck otherwise. I might build my own custom, more applified version. If you figure out how to do it, or whenever you solve the problem, email at yosnowboardyo@hotmail.com with how you did it if you wouldn't mind. Talk to you later.
|
|
|
