| Author |
 Topic  |
|
Aaron Cake
Administrator
Canada
6718 Posts |
 Posted - Nov 05 2011 : 10:20:42 AM
|
Well good, because the world won't end next year.  Those people who believe it will, we call crazy.
Fuel economy is not going to be the strong point of any rotary though. With a well tuned ECU, about 30 highway MPG is possible but I'm guessing you'll be using all stock electronics, which are rather dated and crude. The stock stuff tends to run pretty rich most of the time.
|
 |
|
|
urquiola
Apprentice
Spain
97 Posts |
Posted - Nov 10 2011 : 08:39:27 AM
|
| Hi !: I've found in Malaga, Spain an Rx 7 with 65 k km, the owner wants some 900 U$, but he says that the engine runs well but if you want a fast raising of rpm, around 5000 rpm the engine starts hesitating and stops accelerating, while if you race it more slowly, it goes well beyond 5000 rpm. Any guess about the kind of fault, and if it would be difficult and costly fixing it ?. Regards, salut + |
|
|
|
Aaron Cake
Administrator
Canada
6718 Posts |
Posted - Nov 12 2011 : 10:26:02 AM
|
| What year is the RX-7? They were made from '78 until 2004 and with each generation, the engine setup changed totally. |
|
|
|
urquiola
Apprentice
Spain
97 Posts |
Posted - Nov 20 2011 : 09:24:07 AM
|
| It seems it was first registered in March, 1988, thank you very much for your continued help. |
|
|
|
Aaron Cake
Administrator
Canada
6718 Posts |
|
|
Topic |
|
Mounting a rotary engine in an AMC Pacer
