|
crash1
New Member
1 Posts |
 Posted - Dec 20 2004 : 11:12:03 AM
|
| HELLO,I AM TRYING TO BUILD AN ELECTRIC BICYCLE. I HAVE A 36VOLT 400 WATT CHINESE MADE HUB MOTOR WITH A TWO WIRE 16 GAUGE RED /BLACK FEMALE WIRES. THE THROTTLE HAS THREE WIRES BLACK, BROWN AND BLUISH GREEN. I AM TRYING TO CONNECT THESE TO A CT611B9 ELECTRIC MOTOR CONTROLLER AND DON'T KNOW WHAT WIRE GOES WHERE. IT HAS 7 CONNECTORS THAT ARE NOT LABELED. IT HAS TWO 12 GAUGE MALE CONNECTORS ONE WITH RED AND BLACK WIRE AND THE OTHER WITH BLUE AND BROWN WIRE.IT HAS A SIX PIN MALE CONNECTOR SMALL GAUGE WIRE WITH ORGANGE,PURPLE AND GREY ON ONE SIDE AND GREEN,RED AND BLACK ON THE OTHER SIDE.IT ALSO HAS A FUSED 16 GAUGE MALE CONNECTOR WITH YELLOW AND WHITE WIRES. I THINK IT IS FOR THE ON/OFF SWITCH BUT DON'T KNOW WHICH IS POS./NEG. IT HAS TWO SMALL GAUGE BLACK/RED MALE CONNECTORS AND A SMALL GAUGE ROUND PIN MALE CONNECTOR WITH BLUE AND BROWN WIRES THAT CONNECT WITH A SQUARE OPENING ON THE BLUE WIRE AND A CIRCULAR OPENING ON THE BROWN WIRING SO YOU CAN ONLY PLUG IT IN ONE WAY. WE CALL THAT FIREMAN PROOF. IS THERE ANYONE OUT THERE THAT KNOWS WHAT EACH OF THESE WIRES ARE FOR OR WHO MANUFACTURERS THIS CT611B9 CONTROLLER SO I CAN ASK THEM FOR A DIAGRAM. PLEASE HELP I HAVE BEEN STRANDED FOR A LONG TIME WITHOUT A RIDE. THANKS |
|
electric scooter electrical connections
