Aaron's Homepage Forum
Aaron's Homepage Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Electronics
 Telephone
 8watt audio amplifileir
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

LOKO
New Member

South Africa
4 Posts

Posted - Oct 20 2008 :  1:04:36 PM  Show Profile  Send LOKO an AOL message  Reply with Quote
i am doing this project on the 8watt audio amplifier and would like to know how it works can tou please explain the circuit to me in deatail and how will i know it is working.please i am a beginner on this corse

MOLOKO

audioguru
Nobel Prize Winner

Canada
4218 Posts

Posted - Oct 20 2008 :  3:41:11 PM  Show Profile  Reply with Quote
Please do not post the same question 3 times.

It is an audio amplifier IC. It has about 22 transistors inside.
Its output is only 1.5W at clipping into 8 ohms with a 12V supply or 2.8W at clipping into 4 ohms.
Its output is about 8W at clipping into 3.2 ohms with a 20V supply.

This IC is obsolete and has not been made for 12 years. The pins numbers on the schematic are completely wrong. The schematic is missing important parts. Make the circuit on the datasheet of the TDA2003 instead. It is available, shows all the parts and even shows a pcb design.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Aaron's Homepage Forum © 1995-2020 AARONCAKE.NET Go To Top Of Page
This page was generated in 0.05 seconds. Snitz Forums 2000